Exoracing Silicone Hose Kit For Honda Civic Fn2 K20z4 14pc

As we always try to improve our products, our complete silicone hose kits now include 304 stainless steel worm drive clamps to make installation easier. We have put together complete kits and also sell them individually in case you want to refresh them in the future or accidentally lose any.

Manufactured from 304-grade stainless steel, the clamp kits will have the longest life possible, and as we include the whole clamp kit, you will not need to go out and find your clamps.

Purchase Includes:

• 14 x Exoracing Fn2 Reinforced Silicone Hoses
• 1 x Exoracing 304 Stainless Steel Worm Drive Clamp Kit
• 1 x Exoracing Lifetime Warranty

Features:

• Manufactured from high-quality 4-ply reinforced Silicone.
• Resistant to UV, water and high temperature, with anti-ageing properties.
• Excellent electrical insulation and physiological stability.
• Full kit size: 14pc
• Material: High-grade Silicone
• Wall Thickness: 4.5mm
• Working Pressure: 85 PSI
• Burst Pressure: 245 PSI
• Withstands Operating Temperatures: from -65F to 500F Degrees
• Fitment: Honda Civic FN2 (K20Z4)
• Available in Black With A Purple Inner Layer
• Includes a full 304 stainless steel clamp kit
• Exoracing Lifetime Warranty

Exoracing Fn2 Silicone Hose Kit Installation Guide:

If you are unsure how to install our Exoracing Fn2 silicone hose kit, please follow the instructions below. If you are uncertain about any of the steps, please get in touch with a professional who can assist you with the kit.

1. First, you will want to ensure the engine is cool to the touch to avoid the risk of burns.
2. Next, jack the car up using all safety precautions and ensure the axle stands are correctly positioned.
3. Drain all coolant from the system using the drain plug at the bottom of the radiator.
4. Remove the new Exoracing silicone hose kit from the packaging and start lining each hose to a hose in the engine bay. The kit includes coolant and vacuum hoses.
5. Once you have found the location for every hose, start removing the hoses and installing the new silicone version.
6. Do this for every hose in the kit, and make sure the clips on either end are tight to factory specifications.
7. Once you are happy that every hose is correctly installed, tighten the coolant drain plug at the bottom of the radiator and fill the coolant system with Genuine Honda coolant.
8. Remove the axle stands from the underneath of the car and let the car down.
9. Bleed the system to remove all of the air, which will ensure you get the most out of your cooling system and new hoses.
10. You are all done! Please make sure to tag us in all of your photos on social media as we would love to see your engine bay.