K Series Rockers with AN fittings

K Series Rockers with AN fittings

Finally our rockers with AN fittings are here.
We have put a lot of work into our Rockers, to make them fundamentally the best option on the market. Working very closely with one of the the UKs best engine builders to ensure the product is as good as it can be. We can finally offer them with AN fittings on the rocker ready to go.
An fitting Rocker Cover
Not the normal place for or design for AN fittings on a K series rocker we know. The reason we havent welded them on is because of the poor casting quality of the rockers they can be a pain to weld neatly, im not saying it cant be done but most arent great. That is not the only reason though. Typically when AN fittings are welded on they dont breath from behind the baffle this can cause excess blow by and essentailly the baffle that is in there for a reason cant do its job. This is why they are located on the back of the rocker. The fittings we have had made go right through into the space behind the baffle meaning the baffle is doing the job its designed for.
AN fittings breathing from behind baffle with the plate inplace.
and how they sit behind the baffle with it removed.
 
hopefully you can see what i mean in the above images.
The standard Breather we have blocked off with a removable bung meaning if you wanted to you could add an extra breather to your setup. the OEM location also goes behind the Baffle so made sense to us instead of close that up give you the option of adding to your setup in the future if you wanted to. 
The rockers with the AN fittings in Start at £334.99 if you return your old rocker to us that makes it just £259.99 for a Rocker with AN fittings in ready for paint. 
We can now have them painted for you aswell and they start at £484.99 but again if you send us your old rocker back it makes the cost of the fully painted assembled Rocker £409.99
We cant except any rockers that have been welded im afraid or currently have AN fittings in them.
 
Back to blog