Exoracing Silicone Hose Kit For Honda Civic B16 B18 6pc

Why Use An Exoracing B16/B18 Silicone Hose Kit?

If you own a B-series Honda and still have the OEM coolant hoses, it's time to swap them out. Over time the OEM rubber hoses will crack and deteriorate. These engines are around 30 years old, so the OEM rubber hoses are likely not up to the job.

This is where our Silicone hose kit comes in handy! We understand that OEM rubber hoses can become brittle and prone to failure over time, so we have created a more durable and reliable alternative.

Our Exoracing B-series silicone hose kit has six 4-ply reinforced silicone hoses resistant to cracking, bursting, and discolouration. This means you can enjoy peace of mind knowing that your vehicle's cooling system is well-protected and functioning at its best.

Moreover, our silicone hoses are designed to withstand extreme temperatures from -65 to 500 degrees without distorting. This is far more than your cooling system will ever produce, making our hose kits an excellent investment for any Honda owner.

If you want to see every hose we include in the kit, please see the table we've added at the bottom, as we have cross-referenced every OEM part number with our kit to simplify installation.

So, if you want to ensure the longevity and performance of your vehicle, check out our Exoracing silicone hose kits today!

We also offer a massive Exoracing lifetime warranty on all of our silicone hoses, which provides peace of mind and a risk-free experience.

As we always try to improve our products, our complete silicone hose kits now include 304 stainless steel worm drive clamps to make installation easier. We have put together complete kits and also sell them individually in case you want to refresh them in the future or accidentally lose any.

Manufactured from 304-grade stainless steel, the clamp kits will have the longest life possible, and as we include the whole clamp kit, you will not need to go out and find your clamps.

Purchase Includes:

• 6 x Exoracing Silicone Hoses
• 1 x Exoracing 304 Stainless Steel Worm Drive Clamp Kit
• 1 x Exoracing Lifetime Warranty

Features:

• Manufactured from high-quality 4-ply reinforced Silicone.
• Resistant to UV, water and high temperature, with anti-ageing properties.
• Excellent electrical insulation and physiological stability.
• 6 Silicone Hoses, a direct replacement for the original hoses.
• Thickness: 4.5mm
• Working Pressure: 85 PSI
• Burst Pressure: 245 PSI
• Withstands Operating Temperatures: from -65F to 500F Degrees
• Fitment: Honda Civic Integra B16/B18 (not B18c4)
• Available in Black with a purple inner layer
• Includes a full 304 stainless steel clamp kit
• Exoracing Lifetime Warranty

Exoracing Honda B16 B18 Silicone Hose Kit Installation Guide:

Follow the steps below to quickly and easily install your brand-new Exoracing silicone hose kit. If you are unsure about any of the steps below, please get in touch with a professional to install it.

1. Ensure the cooling system is cold to the touch before installing it to avoid the risk of burns.
2. Jack the car up, using all safety precautions, and use axle stands under the designated points to ensure it is safe to work on.
3. Next, grab a drain pan or bucket, and remove the drain bung at the bottom of the radiator to remove coolant from the system.
4. Once the coolant has fully drained, remove the hoses one by one and match them to the table below.
5. Push on the hoses and secure the clips on either end, making sure they are fully seated.
6. Repeat step 5 for every hose in the kit.
7. Once you are happy all the hoses are tight, fill the system back up with Genuine Honda coolant.
8. Remove the axle stands and let the car back down to the floor.
9. Bleed the system to ensure you have removed all the air to get the most out of your brand-new Exoracing silicone hose kit and cooling system.
10. You are all done! Remember to tag us in any photos on social media, as we would love to see your engine bay!