Exoracing Rocker Cover Spikes For K Series Honda Engines

Why Should You Use Exoracing Rocker Cover Spikes?

Are you looking to add extra flair to your vehicle's engine bay? Look no further than Exoracing valve/rocker cover spikes. These stylish additions are perfect for those preparing for shows or photo shoots and provide a great finishing touch to any engine bay.

Weighing in at only ~10g each, they are the perfect way to modify your engine bay without adding crazy amounts of weight. Also, since they are only 30mm tall, you shouldn't encounter bonnet clearance issues in stock applications. If you are running an engine swap, for example, a K-Swap, it might be worth checking the clearance from the rocker cover to the bonnet before ordering.

As the Exoracing rocker spikes are a very common thread, you can use these on any m6x1.0 studs, making the possibility of uses endless!

Manufactured from high-quality chromium steel, these spikes are incredibly oxidation-resistant and more robust than standard stainless steel spikes. They are also threaded to m6x1.0, the standard size for most Honda or Japanese rocker covers.

They can fit many Japanese car models that use the same thread and pitch. So whether you're driving a Honda or another Japanese vehicle, these valve cover spikes are the perfect addition to take your engine bay to the next level.

Purchase Includes:

• 1 x Exoracing Rocker Cover Spike Set
• 1 x Exoracing Lifetime Warranty

Features:

• Manufactured from high-grade chromium steel
• Internal Thread and pitch: m6x1.0
• Only weigh in at ~10g each
• Will Fit Most Japanese Cars Using M6 Studs
• Height: 30mm
• Base Width: 10mm
• Utilises a 10mm socket to spanner to install
• Exoracing Lifetime Warranty

Exoracing Rocker Cover Spike Installation Guide:

Installing rocker cover spikes is straightforward; follow our guide below. If you are unsure of any of the steps or are not competent in working on cars, please get in touch with a professional to reduce the risk of damage.

1. First, remove the OEM Honda M6 dome nuts using a 10mm socket or spanner.
2. Next, screw on the rocker cover spike by hand and tighten them finger tight.
3. Repeat step 2 for every rocker cover stud you are planning on installing.
4. Tighten each rocker cover spike and torque to the factory setting to ensure a good rocker cover seal. This is usually around 7-9 ft-lbs but check with the owner's manual to make sure.
5. You are all done with installing your brand-new spike bolts. Please tag us with any photos on social media, as we would love to see them!