Exoracing Engraved Flush Spark Plug Cover For Honda Ep3 Dc5 K20 K24

Why Should You Use A Flush Spark Plug Cover?

From the factory, Honda has an ugly plastic plug cover which does the job but isn't as streamlined or pretty as it could be.

Our Exoracing Honda K20 K24 flush Spark Plug Covers are meticulously crafted in the United Kingdom using only the highest-quality materials. We take pride in our attention to detail, evident in every aspect of this cover's design. The cover is similar to our top-selling flush cover but with the added touch of a beautiful engraved Exoracing logo.

To create this cover, we begin with an expertly laser-cut 3mm thick aluminium blank where the bolt holes are then countersunk. The blanks are then folded with precision to fit the unique contours of the rocker cover. Our skilled crafters take great care to ensure minimal gaps and perfect fold angles.

Then they are powder coated in black and placed on the laser engraved to get our signature Exoracing design etched onto the flush spark plug cover.

To ensure that the cover sits at the correct height, perfectly matching the rocker cover, we provide aluminium spacers and a pair of countersunk stainless steel M6 Torx bolts. These components are designed to work seamlessly together, allowing for a snug and secure fit.

With our Exoracing engraved flush Spark Plug Covers, you can rest assured that you are getting a functional and aesthetically pleasing product and a perfect fitting product for k20 or k24 rocker covers.

We are so confident in our product that we now offer a lifetime warranty on our engraved plug cover.

Purchase Includes:

• 1 x Exoracing Engraved Flush Spark Plug Cover
• 2 x Exoracing Spacers
• 2 x Exoracing M6 Torx Bolts
• 1 x Exoracing Lifetime Warranty

Features:

• Fits all k20/k24 rocker covers
• Powder coated in textured black
• Engraved with our Exoracing logo in-house
• Designed and manufactured in the UK
• Made from high-quality 3mm aluminium
• Precision folded to get the perfect fit
• Includes countersunk fitting kit
• Exoracing Lifetime Warranty

Exoracing Engraved Flush Plug Cover Installation Guide:

Follow our step-by-step guide to install our Exoracing spark plug cover correctly. If you're unsure about any of the steps, please get in touch with a professional mechanic.

1. Remove the OEM spark plug cover by removing the four nuts on top of the rocker cover holding down the cover.
2. Remove the OEM spark plug wire plastic cover, allowing the spark plug cover to sit flush.
3. Remove the two OEM studs on the top of the rocker cover (if you're using which ones, line up the plug cover; there will only be two sticking up through the holes. You should be able to use a stud extractor to remove these, but be careful as the engines are old, and some are very seized!
4. Place a spacer under each bolt hole, and line up the new flush spark plug cover. Then install the two torx bolts and tighten them, but be careful not to overtighten them as you might strip the threads.
5. After a few heat cycles, check that the bolts are still tight and that you're ready!
6. That's it; you've installed your brand new Exoracing spark plug cover. Remember to tag us in your photos on social media, as we'd love to see it installed in your engine bay!